The guide has been updated on FEB 4, 2015 as Kali Linux 1.0.9a includes the nVidia driver 340.x and CUDA 5.5.x.
Hardware
CPU : Intel i7-3930K
RAM : 32GB DDR3
Hard Drive : 3TB
Display Card : Two nVidia GeForce GTX 590
Install Kali
Install Kali Linux 1.0.9 on the box as usual. Make sure "secure boot" is disabled in your BIOS before installing. After that, you update the Kali accordingly.
apt-get update
apt-get dist-upgrade
Install nVidia Driver
apt-get install -y linux-headers-$(uname -r)
apt-get install nvidia-kernel-dkms nvidia-driver nvidia-cuda-toolkit nvidia-xconfig
nvidia-xconfig
sed 's/quiet/quiet nouveau.modeset=0/g' -i /etc/default/grub
update-grub
reboot
Fix the nvidia_uvm error
After the reboot :
cd /usr/src/nvidia-current-331.67
make
cp Module.symvers uvm/
make -C uvm
cp uvm/nvidia-uvm.ko /lib/modules/`uname -r`/updates/dkms
Updated on Jan 8, 2015
Remark : If you use backports version, the nvidia_uvm problem is fixed and the cudaHashcat 1.31 can be running without any problem. The backports version of nVidia driver is 340.65 and the version of CUDA driver is 5.5.22 at this time of writing.
echo "deb http://ftp.debian.org/debian wheezy-backports main contrib non-free" >> /etc/apt/sources.list
apt-get update
apt-get install -t wheezy-backports nvidia-kernel-dkms nvidia-cuda-toolkit nvidia-driver nvidia-xconfig
If you have done the following steps, you are not required to re-do it again.
nvidia-xconfig
sed 's/quiet/quiet nouveau.modeset=0/g' -i /etc/default/grub
update-grub
reboot
Install cudaHashcat
mkdir hacking
cd hacking
wget http://hashcat.net/files/cudaHashcat-1.30.7z
7za x cudaHashcat-1.30.7z
wget http://hashcat.net/files-legacy/cudaHashcat-1.31.7z
7za x cudaHashcat-1.31.7z
(Please noted that the current version 1.32 does not compatible to nVidia driver 340.x).
Test the cudaHashcat
cd /root/hacking/cudaHashcat-1.30/
./cudaExample0.sh
cd /root/hacking/cudaHashcat-1.30/
./cudaExample400.sh
cd /root/hacking/cudaHashcat-1.30/
./cudaExample500.sh
Install John the Ripper
(Please note that the current version of john is john-1.80-jumbo-1.tar.gz)
apt-get install libssl-dev
cd hacking
wget http://www.openwall.com/john/g/john-1.7.9-jumbo-7.tar.gz
tar -xvzf john-1.7.9-jumbo-7.tar.gz
cd john-1.7.9-jumbo-7/src
./configure
make
make clean linux-x86-64-cuda
** If your hashes or passwords are longer than 8 characters, you need to change the following before compiling the John.
cd john-1.7.9-jumbo-7/src
nano params.h
Then change from "8" to "18" or "20" and etc.
#define CHARSET_LENGTH 8
Test the John the Ripper
cd /root/hacking/john-1.7.9-jumbo-7/run
./john --device=0,1,2,3 --format=sha512crypt-cuda /etc/shadow
* since I have 4 GPUs, so the --device should be 4.
*** When you changed the CHARSET_LENGTH, you need to generate a new charset. Do it once only.
wget http://downloads.skullsecurity.org/passwords/rockyou.txt.bz2
bunzip2 -d rockyou.txt.bz2
cp rockyou.txt /root/hacking/john-1.7.9-jumbo-7/run
cd /root/hacking/john-1.7.9-jumbo-7/run
cat rockyou.txt | sed 's/^/:/' > rockyou.pot
mv all.chr all.chr-original
mv alnum.chr alnum.chr-original
mv alpha.chr alpha.chr-original
mv digits.chr digits.chr-original
mv lanman.chr lanman.chr-original
./john --pot=rockyou.pot --make-charset=all.chr
./john --pot=rockyou.pot --make-charset=alnum.chr --external=filter_alnum
./john --pot=rockyou.pot --make-charset=alpha.chr --external=filter_alpha
./john --pot=rockyou.pot --make-charset=digits.chr --external=filter_digits
./john --pot=rockyou.pot --make-charset=lanman.chr --external=filter_lanman
Then your cracking command will be :
./john --pot=rockyou.pot --device=0,1,2,3 --format=sha512crypt-cuda /etc/shadow
Install and Test Cryptohaze
cd hacking
wget http://sourceforge.net/projects/cryptohaze/files/Cryptohaze-Linux_x64_1_31a.tar.bz2/download -O Cryptohaze-Linux_x64_1_31a.tar.bz2
tar xjvf Cryptohaze-Linux_x64_1_31a.tar.bz2
cd /root/hacking/Cryptohaze-Linux
./Cryptohaze-Multiforcer -h NTLM -c charsets/charsetall -f test_hashes/Hashes-NTLM-Full.txt
That's all! See you.
